Setting up for Corners Mid-Flight

Saving time on the track is always a priority.  If you can master a technique to get faster, you better take advantage of it.  When things get tight during racing, it’s the little things that add up and make a big difference in the end, especially if you can set up for corner more efficiently.  When the outside is not available or you need to make a pass on the inside, sometimes setting up mid air for a corner can help get that pass made.

If there is a berm already there, you don’t have to do this, but if the inside is flat off the downside, this technique will come in handy.  You want to make sure that you have the jump sized up before trying to sit down and set up mid air.  If you come up short or over shoot it, this will hurt.  Especially guys.  Once you have everything timed right, you want to loosen up in the air, trying to get the back end of the bike out just slightly.  You can let the outside leg out and lean in to get the rear end moving.

As you approach the down side, you want to start moving into the correct position for the corner.  You don’t necessarily have to be seated in the air, but as long as you are ready for the landing and corner, this transition will be smooth.  When you land, make sure that your inside leg is ready for the forces of gravity; keep it high and stiff.

If traction is not a problem, you can apply a handful of throttle and accelerate towards the corner.  Remember to keep weight on the outside foot peg and outside elbow up as this will plant you into ground for more traction.   If the downside is harder, you will have to apply the throttle with grace as you don’t want to the rear end to break loose.

This is something that you should start small on and on a jump you are comfortable with.  No sense in trying this on a new jump and getting hurt.

 

Source: http://www.mxtrainingblog.com/riding-techniques/setting-up-for-corners-mid-flight/

Greg Albertyn Jeff Alessi